Skip to main content
Skip table of contents

Installing the Toyota Shift Lever DIY Harness - 36012 DIY

HGM provides a “Do It Yourself” harness, 36012DIY, for COMPUSHIFT 3 Toyota AB60, A750, and A650 transmission applications.

This allows customers who do not have an factory Toyota shift lever to still use most of the features that the factory levers offers by wiring in a switches and indicators.

The main COMPUSHIFT harness to the various transmissions all use the same connector that mates to an intermediate harness that then connects to the various factory shift lever types. The DIY harness provides flying lead connections as needed from the intermediate harness connector to selected switches and lights.

Below is a table of the pinouts on the connector, the supplied wire color, and some notes on how to use each.

Terminal

Function

Wire

Length (in)

Notes

A

+12 POWER

22GA TXL RED

36

Provides +12V fused power to the park release circuits and lighting systems in the factory shift lever. Generally unused in the DIY configuration

B

D3 INDICATOR

22GA TXL PURPLE

36

Provides +12V power when the shift lever is in the D3 position.

C

D2/D1 INDICATOR

22GA TXL WHITE/GREEN

36

Provides +12V power when the shift lever is in the D2 and D1 positions.

D

+12 LIGHTING

22GA TXL LT BLUE

36

Normally connects to the lighting circuits in the factory shift lever.
Generally unused in the DIY configuration

E

BRAKE SWITCH

22GA TXL GREEN

36

Normally connects to the brake switch in the factory shift lever for park release.
Generally unused in the DIY configuration

F

SHIFT DOWN

22GA TXL BROWN/RED

36

For sport shift transmissions, a momentary switch to ground will downshift or range select down. This switch is usually unused in gate shift transmissions.

G

SHIFT UP

22GA TXL BROWN/YELLOW

36

For sport shift transmissions, a momentary switch to ground will upshift or range select up. This switch is usually unused in gate shift transmissions.

H

S-MODE SWITCH / OD CANCEL

22GA TXL BROWN/WHITE

36

For sport shift transmissions, a switch to ground selects sport mode instead of range select mode.
For gate shift transmissions, a switch to ground selects overdrive cancel.

J

GND

22GA TXL BLACK

36

Ground for switch and indicator circuits

K

GND

22GA TXL BLACK

36

Ground for switch and indicator circuits

L

GND

22GA TXL BLACK

36

Ground for switch and indicator circuits

M

PARK INDICATOR

22GA TXL BLUE/ORANGE

36

Provides +12V power when the shift lever is in the park position.

N

REVERSE INDICATOR

22GA TXL BLUE/RED

36

Provides +12V power when the shift lever is in the reverse position.

P

NEUTRAL INDICATOR

22GA TXL BLUE/BLACK

36

Provides +12V power when the shift lever is in the neutral position.

R

DRIVE INDICATOR

22GA TXL BLUE/YELLOW

36

Provides +12V power when the shift lever is in the drive position.

S

S-MODE INDICATOR

22GA TXL WHITE/ORANGE

36

Provides 20mA of +12V power when the transmission is in sport shift mode.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.