Display Specifications

COMPUSHIFT II

Type

• Handheld or dash-mountable backlit LCD display with 7-key keypad

Display Characteristics

• Number of Characters
  • 80 (20 characters x 4 lines)
• Matrix format
  • 5″ x 7″ with underline
• Display Area
  • 82.00 mm x 28.40 mm
• Character Size
  • 3.90 mm x 5.20mm (not including underline)
• LED Backlight
  • 100,000 hours typical life
  • Three-color adjustable brightness

Chassis

• Chassis is a factory-sealed, injection molded with a threaded inserts for mounting. There are no user-serviceable parts inside. The chassis should not be opened.
• Dimensions
  • 7.125″ x 2.00″ x 1.5″
• Threaded Mounting Insert
  • 4-40 machine screw

Environmental Requirements

• Relative Humidity
  • 0% – 90%, non-condensing
• Temperature (Operating)
  • 0º – 50º C (32º – 122º F)
• Temperature (Storage)
  • -20º – 70º C (-4º – 158º F)
• Mounting Requirements
  • Display must be mounted in a dry area. Direct sunlight should be avoided.

Shock & Vibration

• Normal automotive environment. The display should not be dropped.

Electrical Specifications

• All electrical power is provided by the COMPUSHIFT II controller
• Connection is provided via a standard 4-pin connector and 2 meter (6 foot) cable.
• Custom cable lengths available upon request

Display Formats

• Mixed display of information in small characters
• Large digits
• Bar graphs

Running Dashboard Displays

• The display provides a number of meters while the system is operating, including:
  • System Status and Diagnostics
  • Vehicle Speed
  • Engine Speed
  • Current Gear
  • Throttle Position
  • Relative Hydraulic Pressure
  • Transmission Temperature
  • System Voltage
  • Dynamometer
  • Accelerometer
  • Stopwatch with Lap Times
  • Data Log

On-the-fly adjustments

• Shift Pressure
• Shift Speed

Advanced Setup Features

• The display allows use of an extended set of programming features, including but not limited to:
  • Transmission Type Selection
  • Transmission Shift Mode Selection
  • Torque Converter Clutch Parameters
  • Tachometer Calibration
  • Speedometer Calibration
  • Tire Size
  • Final Drive Ratio
  • Vehicle Weight
  • Measurement Units