Pinouts for Option Connector
OPTIONS Connector
| A | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
Note: This is the view into the receptacle on controller, not the plug.
| CONNECTOR | ROW | PIN | NAME | FUNCTION | WIRE COLOR | TERMINATION | NOTES |
|---|---|---|---|---|---|---|---|
| OPTIONS | A | 1 | 12 V | 12 VOLT OUT | |||
| OPTIONS | A | 2 | 5 V | 5 VOLT DISPLAY | YELLOW | DISPLAY PLUG | |
| OPTIONS | A | 3 | CAN2+ | CAN BUS 2 HIGH SIGNAL | |||
| OPTIONS | A | 4 | RS232 TX | DISPLAY | RED | DISPLAY PLUG | |
| OPTIONS | A | 5 | LIN DATA | COMMUNICATION | |||
| OPTIONS | A | 6 | NO CONNECTION | ||||
| OPTIONS | A | 7 | NO CONNECTION | ||||
| OPTIONS | A | 8 | NO CONNECTION | ||||
| OPTIONS | A | 9 | SOLENOID 12 | REVERSE LAMP RELAY | Must drive relay, not lamps directly. | ||
| OPTIONS | A | 10 | SOLENOID 11 | NEUTRAL START RELAY | Not available on GM 4L80E, GM 4L60E, GM 4L65E | ||
| OPTIONS | A | 11 | SOLENOID 10 | ||||
| OPTIONS | A | 12 | SOLENOID 9 | ||||
| OPTIONS | B | 1 | GND | GND | |||
| OPTIONS | B | 2 | GND | GND DISPLAY | BLACK | DISPLAY PLUG | |
| OPTIONS | B | 3 | CAN2- | CAN BUS 2 LOW SIGNAL | |||
| OPTIONS | B | 4 | RS232 RX | DISPLAY | GREEN | DISPLAY PLUG | |
| OPTIONS | B | 5 | CALIBRATION SELECT 1 | ||||
| OPTIONS | B | 6 | CALIBRATION INDICATOR 1 | ||||
| OPTIONS | B | 7 | CALIBRATION SELECT 2 | ||||
| OPTIONS | B | 8 | CALIBRATION INDICATOR 2 | ||||
| OPTIONS | B | 9 | TCC MANUAL ENGAGE | TURNS ON TCC | BLU/OR | TO SWITCH | SWITCH TO GND |
| OPTIONS | B | 10 | TCC LOCKUP INDICATOR | POWERS LED | BLU | TO LED | |
| OPTIONS | B | 11 | NO CONNECTION | ||||
| OPTIONS | B | 12 | NO CONNECTION |