Overview

Please note these are the instructions for installing part number 35611 which mates with harness 35610. These harnesses and parts use Aptiv GT-150.

To complete this successfully you will need the appropriate wire crimping tool, please refer to the back of these instructions for visual references of the style of crimper required (such as Delphi 1424b) and the method to crimp each terminal correctly.

Please read through all of the instructions carefully before proceeding. If any of the information does not appear correct or the diagrams don’t match your vehicle, please contact HGM.

Please note - there are also extra terminals in each packet, please take your time and understand the crimping process prior to attempting to use the pins as they are single use and will have to be cut off if incorrectly connected.

Hot engines, transmissions and exhausts can cause serious injury.  Before accessing the appropriate connections allow sufficient time for the engine and transmission to cool.

RE4 Transmission

Review the pictures below to identify the components you will be working with.

Pictures may vary due to differences in connectors and transmissions, and should be used for reference only.

Sensor Locations

Internal Loom Lever Switch

Output Speed Sensor

Connector Installation

Output Speed Sensor

The output speed connector will require three wires to be installed in the provided 1x3 connector, identified by the gray connector housing and purple secondary lock.

Refer to the splice table below.

WIRE COLOR

CONNECTOR PIN LOCATION

BLACK

1

WHITE

2

RED

3

Internal Loom

WIRE COLOR

CONNECTOR PIN LOCATION

GREEN

A

YELLOW

B

GREY

C

BLUE

D

PINK

E

BLACK

F

WHITE

G

Shift Lever Switch

The Shift Lever Switch wiring has two connectors to install, one 2 pin connector for the larger gauge wires and another connector for 7 of the smaller gauge wires.

WIRE COLOR

CONNECTOR PIN LOCATION

BLACK

A

BLUE

B

GREEN

C

BLANK (USE CAVITY PLUG PROVIDED WITH CONNECTOR)

D

WHITE

E

YELLOW

F

RED

G

ORANGE

H

WIRE COLOR

CONNECTOR PIN LOCATION

ORANGE

A

BLACK

B

Crimping the Wires

EXAMPLE WIRE CRIMPERS (Aptiv 1424B in photos)


CRIMPING PROCESS