Here are some additional guides and information about COMPUSHIFT II and accessories.
- COMPUSHIFT II Manual
- Preparing for Your Installation
- Unpacking & Inspecting Your Kit
-
Installation
- Overview
- Mount the Controller
- Install the Transmission Harness
- Install the Power & Engine Harness
- Install or Connect a Throttle Position Sensor
- Install the Switch-Shift Wiring Harness (Optional)
- Install the A-B Mode Switch (Optional)
- Install the Overdrive Cancel Switch (Optional)
- Install the Manual TCC Switch (Optional)
- Connect the Display
- Checkout and Testing
- Calibrate the Throttle Position Sensor
-
Monitoring & Tuning Your System
- Overview
- Display DASHBOARD Screens
-
Display SETUP Screens
- Overview
- Transmission Type
- Engine Type
- Shift Mode
- Number of Engine Cylinders
- Throttle Position Sensor Calibration
- Maximum Engine RPM
- Transfer Case Ratio
- Final Drive Ratio
- Speedometer Calibration
- Tire Diameter
- Vehicle Weight
- TCC Mode
- TCC Enable Gear
- TCC Maximum Throttle
- TCC Minimum Throttle
- TCC Enable Speed
- TCC Disable Percentage
- R2L Pressure Boost
- Downshift Offset
- Load Factory Defaults
- Advanced Setup
- System Diagnostics Screen
- Display Contrast
- Display Brightness
- Display Color
- System Units
- Contact Information
- Driving & Shifting
- Diagnostics & Troubleshooting
- Additional Guides & Information
- Specifications & Pinouts