COMPUSHIFT II

Type

  • Handheld or dash-mountable backlit LCD display with 7-key keypad

Display Characteristics

  • Number of Characters
    • 80 (20 characters x 4 lines)
  • Matrix format
    • 5″ x 7″ with underline
  • Display Area
    • 82.00 mm x 28.40 mm
  • Character Size
    • 3.90 mm x 5.20mm (not including underline)
  • LED Backlight
    • 100,000 hours typical life
    • Three-color adjustable brightness

Chassis

  • Chassis is a factory-sealed, injection molded with a threaded inserts for mounting. There are no user-serviceable parts inside. The chassis should not be opened.
  • Dimensions
    • 7.125″ x 2.00″ x 1.5″
  • Threaded Mounting Insert
    • 4-40 machine screw

Environmental Requirements

  • Relative Humidity
    • 0% – 90%, non-condensing
  • Temperature (Operating)
    • 0º – 50º C (32º – 122º F)
  • Temperature (Storage)
    • -20º – 70º C (-4º – 158º F)
  • Mounting Requirements
    • Display must be mounted in a dry area. Direct sunlight should be avoided.

Shock & Vibration

  • Normal automotive environment. The display should not be dropped.

Electrical Specifications

  • All electrical power is provided by the COMPUSHIFT II controller
  • Connection is provided via a standard 4-pin connector and 2 meter (6 foot) cable.
  • Custom cable lengths available upon request

Display Formats

  • Mixed display of information in small characters
  • Large digits
  • Bar graphs

Running Dashboard Displays

  • The display provides a number of meters while the system is operating, including:
    • System Status and Diagnostics
    • Vehicle Speed
    • Engine Speed
    • Current Gear
    • Throttle Position
    • Relative Hydraulic Pressure
    • Transmission Temperature
    • System Voltage
    • Dynamometer
    • Accelerometer
    • Stopwatch with Lap Times
    • Data Log

On-the-fly adjustments

  • Shift Pressure
  • Shift Speed

Advanced Setup Features

  • The display allows use of an extended set of programming features, including but not limited to:
    • Transmission Type Selection
    • Transmission Shift Mode Selection
    • Torque Converter Clutch Parameters
    • Tachometer Calibration
    • Speedometer Calibration
    • Tire Size
    • Final Drive Ratio
    • Vehicle Weight
    • Measurement Units