This setting offers “A” and “B” modes. You can set up two different COMPUSHIFT configurations in advance, and use the mode switch to change between them.

This adjustment allows you to set a percentage that determines the TCC disengage speed.

     TCC Disable     
     Percentage A
         10%

  • For example, a 10% setting will establish a disengage speed that is 10% below the speed at which the TCC engages.
  • In some vehicles torque converter clutch engagement causes the vehicle speed to drop enough for the TCC to disengage. This on-again-off-again situation can often by avoided by increasing this value.