Vehicle Speed This screen shows the current vehicle speed in MPH or KPH, depending on your units setting.

SPEED   

When you press the “select” button, the speed is shown continuously.

  56 MPH

Pressing “select” again exits.

 


 

Throttle Position

This screen shows the current throttle position as percentage from 0 to 100.  

TPS     

When you press the “select” button, the throttle position is shown continuously.

    100%

This value should smoothly vary as the accelerator pedal is pressed.

Note that this will not show correct throttle position unit the throttle position sensor has been calibrated.

Pressing “select” again exits.

 


 

Transmission Pressure (GM Only)

This screen shows the current transmission main line pressure in PSI or kilopascals, depending on your units setting.

PRESSURE

When you press the “select” button, the pressure is shown continuously.

 130 PSI

For most transmissions, this value will be in the 80-100 PSI range in neutral at an idle.

Pressing “select” again exits.

 


 

Overdrive

This screen shows whether or not 4th gear or overdrive is engaged.  

OD      

When you press the “select” button, the overdrive status is shown continuously.

      ON

On the GM 700R4 / 2004R, this screen shows the status of the 4th gear switch.

On the Chrysler A518/46RH and Chrysler A618/47RH, this screen shows the status of the 4th gear / overdrive solenoid.

Pressing “select” again exits.

 


 

Torque Converter Clutch

This screen shows whether or not the torque converter clutch is engaged.

TCC     

When you press the “select” button, the torque converter clutch status is shown continuously.

      ON

Pressing “select” again exits.