COMPUSHIFT Mini Manual Tuning and Driving Current: Status Screens Status Screens Vehicle SpeedThis screen shows the current vehicle speed in MPH or KPH, depending on your units setting. SPEED When you press the "select" button, the speed is shown continuously. 56 MPH Pressing "select" again exits. Throttle PositionThis screen shows the current throttle position as percentage from 0 to 100. TPS When you press the "select" button, the throttle position is shown continuously. 100% This value should smoothly vary as the accelerator pedal is pressed.Note that this will not show correct throttle position unit the throttle position sensor has been calibrated.Pressing "select" again exits. Transmission Pressure (GM Only)This screen shows the current transmission main line pressure in PSI or kilopascals, depending on your units setting. PRESSURE When you press the "select" button, the pressure is shown continuously. 130 PSI For most transmissions, this value will be in the 80-100 PSI range in neutral at an idle.Pressing "select" again exits. OverdriveThis screen shows whether or not 4th gear or overdrive is engaged. OD When you press the "select" button, the overdrive status is shown continuously. ON On the GM 700R4 / 2004R, this screen shows the status of the 4th gear switch.On the Chrysler A518/46RH and Chrysler A618/47RH, this screen shows the status of the 4th gear / overdrive solenoid.Pressing "select" again exits. Torque Converter ClutchThis screen shows whether or not the torque converter clutch is engaged. TCC When you press the "select" button, the torque converter clutch status is shown continuously. ON Pressing "select" again exits. ×