Skip to main content
Skip table of contents

TCC Disable Percentage

This setting offers "A" and "B" modes. You can set up two different COMPUSHIFT configurations in advance, and use the mode switch to change between them.

This adjustment allows you to set a percentage that determines the TCC disengage speed.

  • For example, a 10% setting will establish a disengage speed that is 10% below the speed at which the TCC engages.
  • In some vehicles torque converter clutch engagement causes the vehicle speed to drop enough for the TCC to disengage. This on-again-off-again situation can often by avoided by increasing this value.





    TCC Disable     
    Percentage A
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.