Skip to main content
Skip table of contents

TCC Maximum Throttle

This setting offers "A" and "B" modes. You can set up two different COMPUSHIFT configurations in advance, and use the mode switch to change between them.

As you increase throttle, the TCC should disengage to allow the torque converter to multiply torque for greater acceleration.

This screen allows you to adjust the throttle position where the TCC disengages.

For vehicles with higher torque engines, this parameter can be set higher.



TCC Maximum Throttle
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.