Skip to main content
Skip table of contents

Transmission Temp Sensor Bias

This screen allows you to tell COMPUSHIFT II whether or not some other device is providing power to the transmission temperature sensor. In most cases, COMPUSHIFT is the only device reading transmission temperature, so you should leave this setting on.

  • The default setting is "On."
  • Change the setting to "Off" if you are connecting to an existing controller or temperature gauge that provides power to the temperature sensor.



 Transmission Temp  
    Sensor Bias
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.