Breadcrumbs

Display Specifications

COMPUSHIFT II

Type

  • Handheld or dash-mountable backlit LCD display with 7-key keypad

Display Characteristics

  • Number of Characters

    • 80 (20 characters x 4 lines)

  • Matrix format

    • 5″ x 7″ with underline

  • Display Area

    • 82.00 mm x 28.40 mm

  • Character Size

    • 3.90 mm x 5.20mm (not including underline)

  • LED Backlight

    • 100,000 hours typical life

    • Three-color adjustable brightness

Chassis

  • Chassis is a factory-sealed, injection molded with a threaded inserts for mounting. There are no user-serviceable parts inside. The chassis should not be opened.

  • Dimensions

    • 7.125″ x 2.00″ x 1.5″

  • Threaded Mounting Insert

    • 4-40 machine screw

Environmental Requirements

  • Relative Humidity

    • 0% – 90%, non-condensing

  • Temperature (Operating)

    • 0º – 50º C (32º – 122º F)

  • Temperature (Storage)

    • -20º – 70º C (-4º – 158º F)

  • Mounting Requirements

    • Display must be mounted in a dry area. Direct sunlight should be avoided.

Shock & Vibration

  • Normal automotive environment. The display should not be dropped.

Electrical Specifications

  • All electrical power is provided by the COMPUSHIFT II controller

  • Connection is provided via a standard 4-pin connector and 2 meter (6 foot) cable.

  • Custom cable lengths available upon request

Display Formats

  • Mixed display of information in small characters

  • Large digits

  • Bar graphs

Running Dashboard Displays

  • The display provides a number of meters while the system is operating, including:

    • System Status and Diagnostics

    • Vehicle Speed

    • Engine Speed

    • Current Gear

    • Throttle Position

    • Relative Hydraulic Pressure

    • Transmission Temperature

    • System Voltage

    • Dynamometer

    • Accelerometer

    • Stopwatch with Lap Times

    • Data Log

On-the-fly adjustments

  • Shift Pressure

  • Shift Speed

Advanced Setup Features

  • The display allows use of an extended set of programming features, including but not limited to:

    • Transmission Type Selection

    • Transmission Shift Mode Selection

    • Torque Converter Clutch Parameters

    • Tachometer Calibration

    • Speedometer Calibration

    • Tire Size

    • Final Drive Ratio

    • Vehicle Weight

    • Measurement Units