You can utilize the COMPUTSHIFT II Switch-Shift feature with an optional wire harness (usually for customers who want pushbutton or paddle shifting).
-
Switch-Shift lets you manually upshift and downshift the transmission via a pair of pushbuttons or a paddle shifter.
-
The Switch-Shift Wiring Harness (shown here) connects into the Transmission Wiring Harness and should be routed to your switch location or paddle shifter.
Because each Switch-Shift installation is customized, you'll have to provide your own switches or paddle shifter. HGM Automotive Electronics can recommend switches or a paddle shifter for your specific application; just ask.
Connect the Three (3) Leads
-
The white wire is common and gets connected to one pole of both switches.
-
The white/red striped wire gets connected to the upshift switch.
-
The white/black striped wire gets connected to the downshift switch.
Connect to the Power & Engine Harness
Snap together the three-prong plug with the socket provided on the Power & Engine Harness. Be sure to fully compress the green gasket.
